We have come with the top 10 best radiator stop leak for emergency situation. Reliable, durable and really helpful radiator stop leak when you needed the most.
A leak is an annoying problem no matter where and when it occurs. A leaking radiator or cylinder head can affect the performance of our cars and can prevent us from reaching our destination.
When something like this occurs, all you think about is how to take your car to a mechanic’s shop to get the leaking part fixed. Well, there’s no need to do this anymore.
Equip your car with a radiator seal stop leak on the spot, without requiring the assistance of a mechanic. This is the kind of product that should never miss from your car, as you never know when a leak can occur. You may also like
- Comparison Table of Radiator Stop Leak
- Top 10 Best Radiator Stop Leak Reviews
- Buying Considerations For The Best Radiator Sealant
- FAQ About Best Coolant Stop Leak
- Final Thoughts
Comparison Table of Radiator Stop Leak
To use a radiator sealer you don’t need to have any kind of knowledge or experience in the mechanical sector. You just take the product and use it as instructed on the package, and your leak will be solved in a matter of minutes.
Leaks will be repaired immediately, so you can continue your road trip and reach the desired destination.
Because these are the kind of matters that occur without a warning, knowing about the existence of such products can actually save you. So, here is a list with 10 of the top radiator sealers that will stop those leaks.
Top 10 Best Radiator Stop Leak Reviews
01. K-Seal ST5501 Multi Purpose
This is a very good product to have around when you’re dealing with a crack in the radiator, freeze plugs, head gasket, cylinder head, water pump casing, or engine blocks.
Such leaks don’t have to transform into repair bills that usually slightly more consistent than you may have expected. The fix offered by this product is said to be permanent and quick.
And all you need to do is shake the container first and then simply pour it into the coolant system of your car.
It has a microfiber content that will immediately begin to bind together forming a durable and resistant patch over the cracked area. The product has been scientifically tested and will work without a doubt.
Just make sure you respect the manufacturer’s indications. If it doesn’t fix the leak, it may be due to the fact that the system is over-pressurized, the excess pressure preventing the product to reach the problem area.
In this case, you will need to fix the high pressure first and then use the product.
- It can be used by anyone, as you simply need to shake the container and pour the content
- The leak repair done by the product is permanent, so you won’t have to replace the cracked part
- It doesn’t matter what brand of antifreeze you use, as it will mix with any antifreeze
- Once in the cooling system, it is not required to drain it out or flush it
- The content of the product will be activated by the gases present in the car’s combustion chamber or by the heat generated by the cooling system and engine
02. Bar’s Leaks Pack
Did you notice a leak in the cooling system of your car? Then you should not worry about costly repairs.
All you need to do is find out more about this product that is capable of fixing that leak in the easiest and most convenient manner possible. This radiator seal stop the leak without the need to flush all the antifreeze from the system.
In fact, you don’t need to do anything else but pour the product into the cooling system. It can even be used in water without adding anything else.
But, in this case, the manufacturer recommends utilizing another bottler of this product, after the installation of the antifreeze into the system.
It is also worth mentioning that it will work with any kind of antifreeze, whether water was added or not. The product will require anywhere between 10 to 20 minutes to fix the leak. Meanwhile, it is recommended to keep the car running in idle mode.
If the leak doesn’t disappear after 20 minutes, you may require a second bottle to fix the issue. In case a second bottle doesn’t repair the leak, your car may require the attention of a mechanic, as the part could require serious repairs.
- It can fix radiator leaks and take care of plug leaks
- It can also repair leaks of the heater core or gasket
- It lowers the temperature of the water, allowing the engine to cool down and preventing any unwanted damages
- It can be directly added to the cooling system, as it comes in the bottle
03. Dike Radiator Stop Leak
When you are dealing with a leak in the coolant system of your car, you need to find a fast solution to the matter as it can lead to serious troubles. The engine can get easily overheated when there isn’t a sufficient amount of antifreeze in the system.
Thus, even if the crack is small, it can significantly reduce the amount of antifreeze as you drive the car on the road, even when it sits unused in the parking lot.
When there isn’t enough antifreeze in the cooling system, the engine is not sufficiently lubricated, which can lead to excessive heating of its parts and severe damages.
So, you may want to have a bottle of Dike Temporary Radiator Stop Leak.
As the name of the product suggests, this is just a temporary solution that will allow you to drive the car to the nearest car repair shop or your preferred mechanic. The product can be used in any kind of radiator system.
All you have to do is pour the product into the radiator and allow the engine to run for 15 minutes, without actually driving the car.
If your cooling system is larger than 4 gallons, you will need an additional 4 ounces of product to every extra gallon of coolant.
- It will stop leaks in the radiator in maximum 15 minutes
- In the case of internal leaks, it will keep the mixture of water and antifreeze to flood the engine compartment
- It will allow the small passages of the coolant system to work undisturbed, as it will only fix leaks
04. ATP AT-205 Re-Seal Stops Leaks
A leak can occur in a variety of system, threatening to cause not just functional issues, but also severe damages to the parts of the system.
So, as soon as you notice a leak or crack, you will have to take care of it immediately.
Because it is not always possible to reach a mechanic or have a professional come and take care of your system right away, you need a solution that will allow you to fix the problem on the spot.
ATP AT-205 Re-Seal Stops Leaks can take care of leaks in car engines, transmission, power steering, differentials, and hydraulic systems. Implicit, it will work with all the oils, fluids, and gases utilized by these systems.
If you have any of these systems in hands-on a frequent basis, like the engine of your car, you need to have a bottle of this sealer in handy at all times.
It is enough to pour the product in the system, just like when you proceed with pouring oil or fluids and allow it to work its magic.
It will easily mix with the existing oils and fluids and will condition the entire system, fixing the existing leaks and cracks.
After 5 hours of driving the car or running the system, the leaks should be completely repaired, unless the system suffered major damages.
- It will provide immediate leak repairs, to a wide range of engines and systems
- Regardless if we are talking about gear oil, synthetic oils, power steering fluids, ATF, or hydraulic oil, the product will mix well with all of them
- Besides sealing leaks, the product will also condition rubber seals, gaskets, differentials, and other parts of the cracked system
- One bottle, containing 8 ounces of product, can deal with a system of a 6-quart capacity
05. Bar’s Leaks HDC Radiator Stop Leak
Until this point, we talked about liquid radiator sealer stop leak. Perhaps it is time to take a closer look at this type of product that comes in the form of tablets.
It is just as easy to use as the liquid form, some users considering this version more convenient.
This product from Bar’s will easily fix radiator leaks from within the system so that you can enjoy a fully functional vehicle in no time and get back on the road without facing additional damages.
They are very accessible and, in spite of the way they may look, they are quite effective at doing the job for which they were created.
They can take care of both internal and external leaks, and even manage coolant-to-oil leaks.
Besides this, it will prevent scale and rust from forming in the system, it will take care of pH imbalances, will improve the lubrication degree of the system, and balance the electrolytes.
In other words, the system should be able to function at much better parameters once the tables are used to repair the existing issue.
They are highly effective because the particles forming the tablets can shrink as much as 15 times their initial size, so they will definitely put an end to any leaks.
- It will work with any kind of antifreeze used by the system and will take care of leaks in a matter of minutes
- It will condition the entire system and contribute to better functioning of the engine
- It prevents the formation of rust and keeps parts from corroding
- It will balance the electrolytes
- Improves lubrication in the case of water pumps
06. AlumAseal ASBPI12 Radiator Stop Leak
In case you think that liquid sealers are too messy, maybe you would like to give this product a chance. It is a radiator sealer stop leak in the form of powder, which can be easily released from its blister.
It works very easy and simple and there’s no need for you to have any knowledge in the mechanical sector. Just open the blister and pour the powder inside the cooling system.
Allow it a few minutes to do its job. It is worth knowing that you should wait for the radiator to cool down before removing its cap, so hot fluids won’t spray out of it due to temperature differences or for you to suffer accidental burns.
Before pouring the powder into the radiator, switch the control of the system to hot and then proceed to introduce the powder into the system.
If necessary, add more coolant to the system, to reach an adequate level and drive the car in order to make the product work in sealing the leaks.
You can easily use this product with any type and brand of coolant or antifreeze, as it will work in every case.
- It repairs leaks in a fast and easy manner
- It can fix leaks regardless if the cooling system is made out of plastic, metal, or rubber parts
- The issue will be repaired without producing any clogs within the system
- One tube of the product can deal with units up to 21 liters or 22 quarts
07. Bar’s Leaks 1109
As the Bar’s slogan goes, don’t replace, repair! The truth is that having this kind of product in your car at all times can indeed save you from a lot of troubles. This particular product is even more recommended in the case of large cars, like SUVs, vans, and trucks.
But, if you have a rather old car, with parts that took a good degree of wear and tear over time, it is worth taking this product into consideration.
In case you tried radiator sealers before, but they failed to deliver the expected results considering that the leaks were larger than usual, you should give this product a try. It was made to be powerful enough to deal with larger tasks, so it won’t disappoint you.
Thus, it is possible to save money on repairs by simply opting to use this product, instead of visiting your mechanic.
You don’t even have to drain the antifreeze from the cooling system, as the formula of the product is compatible with all kinds of antifreeze products.
It contains a special formula of sodium silicate liquid glass that will work together with the antifreeze, so you won’t have to remove it.
- It works great in the case of larger leaks, usually found in the case of large cars
- Leaks in the heater’s core, freeze plug, head gaskets, and even in the blocks will be covered by this product
- There is no need to drain the cooling system
- It can be added in water alone, but in this case, you will need a second bottle of product to add in the cooling system once the coolant was installed
08. J-B Weld DS-114
The manufacturer markets this product as a very economical solution that will fix all leaks in your engine.
Because the product comes in a granulated form, the small granules will immediately solve in the cooling system, mixing with the existent fluids and repairing existed leaks in a matter of minutes.
The best part is that this product is not toxic, so you can use it in complete safety and without worrying to get it on your skin or inhaling toxic vapors. In spite of its granulated formula, the product will not cause any clogging or prevent the cooling system to work properly.
The repair done with the help of this product will be permanent, so you will know that the job is well done without paying a mechanic or any other kind of professional for the same kind of job.
Of course, this is possible unless your system is not too severely damaged, which will require a different degree of attention.
Just pour the product in a slow manner into the radiator, while keeping the engine running, so that its fluids circulate properly. Allow the engine to run until the water gets hot and there are no more leaks.
- The product works for leaks in cars, vans, trucks, tractors, or buses radiators
- It has a safe, non-toxic composition
- Besides fixing leaks, it will also prevent rust from forming and will lubricate the entire system
- It is more economical than liquid products with the same qualities
- It will rapidly dissolve and will not produce any clogging
09. Bar’s Leaks G12BP
Did you notice that your car is losing fluids? Then you need to fix the issue right away and avoid driving your car in this state, as the engine can get overheated by lacking a sufficient amount of fluids.
This will lead to serious damages to your engine, so it is best to fix the leak before hitting the road.
Don’t worry, as this doesn’t mean that you will have to visit the mechanic and have to face yet another expensive repair. All you need is to have this kind of product in your car, so when a leak occurs, you are ready to manage it properly.
Does this product work? Yes, it will work, but in the case of severe damages to the cooling system, it may not provide the desired results.
Still, if it only a leak, it will seal it and prevent the engine from losing its much-needed fluids.
You don’t need to do anything else but pour the product in the radiator and allow it to do its job by allowing your engine to run in the idle mode.
The product will work with any kind of coolant you may be used for your car, so there’s nothing to worry about.
- 1 tube of the product will fix cars with 4 to 6 cylinders and light trucks, so for larger vehicles and leaks that were not solved by one single tube, you will need 2 tubes
- Besides fixing leaks, the product will also condition the entire system and help it work better
- It works against the formation of rust and corrosion, so it also protects the system
- It lubricates the seals of the water pump
- It will restore the electrolytic balance
10. Prestone AS145 Radiator Sealer
A water pump, radiator, and heater core that leaks can be easily fixed with this product. By using this product for your system, not only will you stop the leak but will also get rid of corrosion.
This is the main factor that leads to cracks and leaks. So the fact that this product manages corrosion as well as a great feature.
Its formula contains both synthetic and natural components, which are all meant to do one thing and that is to seal that well for good.
The product works so well due to the fibrous particles that find and adhere to the cracked area, preventing any fluids to escape from the system.
It can deal even with leaks that appear to be rather large, all this without affecting the functioning of the system and flow of the existing fluids.
- It has a special and effective formula that will help you with leaks in a matter of minutes
- It will prevent corrosion from occurring, protecting your system against future leaks
- It contains a mixture of synthetic and natural ingredients, with a fibrous consistency, which will work wonders together in sealing leaks
- You can rely on it even in the case of larger leaks, as long as the system is not severely damaged
Buying Considerations For The Best Radiator Sealant
Even if a radiator leak never occurred to you, it just means that you were lucky so far. No one wishes to think about problems, but they can occur and they usually do it without any previous warning.
A radiator sealing product does not cost a fortune, so even if you won’t have the chance to use it, you won’t feel that bad for spending a few bucks.
But, if your radiator or engine does crack and starts losing fluids, you will be grateful for making such a choice.
But, as you may have noticed, this type of product comes in a variety of forms. In order to enjoy the best sealing results, you will need to choose the product well, so that it will serve you adequately.
Also, there are situations in which one single tube or bottle containing the product will not be enough to solve your issue.
This may depend on the size of your system, the severity of the leak, or if you use the product directly in water, adding the coolant later on. So, yes, there are quite a few aspects to consider before making such a purchase.
For instance, if you are driving a truck or van, instead of a small car, or deal with large systems on a daily basis, you need to buy a product that is reliable enough in this case.
Or you can get two or more bottles of the same product, making sure that you have enough to have the problem fixed right away. Of course, it is worth remembering that systems with severe damages cannot be repaired by these radiator sealers.
So, if it doesn’t work after using two bottles, or as many as they are recommended by the manufacturer, you may need the assistance of a professional. However, having this product around can save you from unnecessary and expensive repairs.
In the majority of the cases, a radiator sealant will do the job it was created for. Thus, it is definitely worth having it around.
Also, you will need to decide whether you prefer liquid, tablets, or granules. What’s the difference between these types of radiator sealant?
Well, it can be a matter of personal preference, depending on what you consider more convenient, or there can be some differences when it comes to the properties of the product.
For this, you will have to closely read the description of each product and take into consideration the most important features. We came up with this guide so that this process is easier for you.
We did the hard work in your place and came up with short and clear descriptions, together with highlighting the most important features of each reviewed product.
Concerning radiator sealants that come in a liquid form, they are the most commonly met and are considered as being the most practical by many people. Most manufacturers bottle liquid radiator sealants in bottles that are enough for one-time use.
This means that all you have to do is open the cap, pour the liquid inside the radiator, and allow it to do its job by running the engine.
The product is dosed to suit the size of your cooling system, so you won’t have to do anything else. Just make sure to get the product that is suitable for the size of your system. Still, some people may find liquids a bit messy, with the risk of having to deal with accidental spills.
If you want a radiator sealant that is easier to use, consider using tablets instead of liquid. This way, you will avoid the need to pour liquids, if you find that inconvenient.
To make the product work, introduce the tablet into the radiator while keeping the engine running, so that the water is hot enough to allow the tablet to dissolve.
Once this happens, the product will begin conditioning the entire system and seal the existing cracks. Just make sure to use the tablets as instructed by the manufacturer.
This means that one tablet may not be enough for your cooling system. Thus, before using the product, read the specifications on its label in order to obtain the best results.
In case you consider that both tablets and liquids are too hard to handle, you have a third option. We are talking about granules. They are small enough to be poured with ease without any spilling on the side and to dissolve with ease once they’re in the system.
Also, they will be packed in tubes or small containers that will allow you to pour them carefully in the cooling system, without having to dose the quantity.
So, yes, the number of granules will be sufficient for a one-time use of the product. But, again, you may need a second dose if your system is larger than usual or if the first dose failed to do its job right.
According to some manufacturers, the granules are more effective and economical compared to liquids.
The truth is that they do have a fibrous structure that works very well in the case of cracks. But, after all, all radiator sealants are made to solve such issues, so most certainly they will all work if you choose a product adequate for your cooling system.
It may seem tricky to choose a product when there are so many options available. We did our best to make things easier for you and to provide relevant information.
Now you just need to pay a bit of attention to the properties of each product and see which one will work best. Choose well and radiator cracks will not drill a hole in your budget.
FAQ About Best Coolant Stop Leak
Will be a radiator sealant a more affordable option?
Considering that automotive repairs can be rather expensive, giving this product a try is definitely worth taking into consideration. In most cases, we are simply talking about a crack in one of the system’s hoses, which can be easily repaired with this type of products.
But, if you decide to take your car to a garage, the costs of the repairs can be anywhere between $45 and $100, depending on each garage.
Thus, purchasing a radiator sealant is definitely a more affordable option that can save you from spending money on an entire repair kit and labor of the mechanic, in order to fix a small crack.
How long will the fix last?
In the case of most radiator sealants, the fix is permanent. So, once the leak stopped, you can be sure that you’ll be able to use your car as you did before, without worrying about further damage.
Of course, this depends on how badly the cooling system is damaged. There are cases in which using such a product may not help.
However, it is recommended to try using a double dose in case the leak appears to be stubborn, as there are high chances to solve this matter this way, without costly repairs.
But, do bear in mind that there are products that will fix your leak temporarily, allowing you to drive your car to a garage in order for it to be fixed. Thus, it is worth checking the specifications of the product before purchasing it.
How fast will a radiator sealant work?
Each of us drives his or her car in order to reach a destination. When a radiator leak occurs, it will keep us from reaching our destination, which can be very frustrating.
This is why this type of product was developed to work fast, so you can be on your way in no time. After pouring a radiator sealant in the cooling system, you should wait anywhere between 10 to 20 minutes for the product to do its job.
Just don’t forget that you’ll have to allow the engine to run during this period, as it must warm up its fluids and circulate them around the system so that the product reaches the damaged area. Meanwhile, you should keep an eye on the leak to see if it stops.
Some manufacturers recommend adding a second dose if the leak was not sealed after 20 minutes. Bear in mind that some products may require a few hours to do their thing right. So, again, read the instructions and recommendations of the manufacturer.
How to properly use a radiator sealant?
First of all, you need to select the product that will work best in your case. Go through the reviews and features of each product, and opt for the one that has the desired characteristics. Ideally, you should not wait until the crack occurs in order to purchase such a product.
You should have it in handy, in the car, so that you can use it right away. When a crack occurs and the coolant leaks from the system, there an increased risk for the engine to get overheated and suffer severe damages.
Thus, you should not drive the car until the leak is fixed and coolant added to adjust the loss.
The product must be poured inside the radiator. For this, you need to unscrew the cap of the radiator and pour the radiator sealant in, just like you do when you add coolant to the system.
It is worth mentioning that you don’t have to drain the system of existing fluids. The product will work with any kind of antifreeze and oil that may exist in the system.
Add radiator fluid so that the level is as recommended by the manufacturer. Due to the leak, the engine lost fluids and functioning on a low level of fluids can overheat the engine. Make sure you take care of the lost amount by adding fluids to the system.
Start the car’s engine and allow it to run on idle. The engine should be allowed to warm up, allowing the fluids to run neatly along with the system.
Once the engine is warm, you will need to run the car up to 10 minutes, allowing the sealant to coat the entire radiator and fix existing leaks.
At this moment, the leak should stop being noticeable. It is time to add a mixture of water and coolant in the radiator, at the recommended level.
The mixture is made out of half of part of water and half of part of coolant. Pour this mixture in the radiator until the recommended level is reached.
It is recommended to give the car a chance to rest for 12 hours. It is easier if you do this during the night-time when you don’t normally drive the car.
This will enable the radiator sealant to set up adequately in the system. After 12 hours, you will be able to drive the car without problems.
It is worth keeping in mind that these recommendations may vary from one product to another. This is why you should also read the manufacturer’s indications before using a particular product for your cooling system.
What if the cooling system has plastic parts? Will the sealant work?
These sealants are made to work regardless of the materials present in the cooling system. So, it doesn’t matter if your system has plastic, rubber, or metal parts, as a radiator sealant will fix leaks and condition any type of material.
Will the product fix cars only?
No, these products are made to be used with a variety of systems, not just car cooling systems.
You could successfully use a radiator sealant for a hydraulic system, heater cores, gaskets, and other systems that could use the properties of a radiator sealant.
Just make sure to read the technical details and characteristics of the product before purchasing and using it.
Although it doesn’t seem like a severe issue, a leaking radiator is a very serious business. Driving your car while having such a leak, even if it appears to be small and insignificant, raises a set of severe risks for your car.
This is why you should inspect your car on a daily basis and watch for small pools of liquids under the car, in the area where it was parked.
You see, if you raise the hood of the engine, you may not notice a leaking hose. But, all the liquid that is escaping through a crack will end up under your car, on the ground, as it slowly drains away one drop at a time.
Noticing if fluids are draining from your car is extremely important, as it will help you address the matter as soon as possible.
Is it safe to drive your car while having a radiator leak? First of all, you need to understand the role of the radiator for your car’s engine.
When running, the engine generates a large amount of heat, due to the combustion processes that happen within the engine. Thus, it needs a cooling system in order to function at an adequate temperature.
Temperatures that are too high can lead to permanent damages to the engine, as parts break and meltdown.
Having all these in mind, it is more than obvious that it is not recommended to drive a car with a damaged radiator or cooling system. The radiator works with the help of special coolants, which may have various colors and properties.
If the level of the coolant in the cooling system drops, due to a leak, the radiator will fail to do its job right. In this case, there is a risk for the engine to get overheated and get damaged beyond repair.
Do not take in such risks and have a radiator sealant in hand at all times. Having such a product around can save you from very expensive car repairs.